No Impact 60Nm Harmonic Drive Gearbox For Industrial Robot

Harmonic Reducer Output Torque 3.5-160Nm Output Speed 30-200rpm for CNC Machines

PRODUCT FEATURESS

Application:

Industrial robot, service robot , metal machine robot, medical device, analysis test equipment, energy related equipment, paper-making machine...

Advantages:

1. Smooth movement, no impact, low noise
The meshing and meshing of teeth gradually enters and exits between the teeth of the rigid wheel with the deformation of the flexspline. During the meshing process, the tooth surface touches, the slip speed is small, and there is no sudden change.

2. Tooth side clearance can be adjusted.
In the meshing of harmonic gear transmission, the gap between the flexspline and the rigid gear mainly depends on the shape of the wave generator and the tooth profile of the two gears. Therefore, the backlash can be adjusted to make the transmission backlash small, even in some cases. Can reach zero side clearance

3. High transmission efficiency.
Compared with other transmissions of the same speed ratio, harmonic transmission has a high efficiency due to the small number of moving parts and the low speed of the meshing tooth surface. With the difference in speed ratio (u=60-250), the efficiency is about 65 -About 90% (lower efficiency of harmonic complex wave transmission), the wear of tooth surface is very small.

4. Good coaxiality.
The high-speed shaft and low-speed shaft of the harmonic gear reducer are located on the same axis.